Fundamentals Of A Kitchen Water Pipes
Fundamentals Of A Kitchen Water Pipes
Blog Article
Working as a plumber can be very rewarding. It will require installing, maintaining and repairing piping and water systems all over your location, in either commercial or residential buildings. The pay for this kind of work is usually quite good in a highly developed area.
If none of these materials is available to you you can always elect loud toilet to soak rags or towels in hot water and wrap them around the frozen pipe. This will probably take longer than any of the methods previously mentioned.
There are two, one on each side of the toilet, closet bolts which hold the toilet to the floor. If there are caps over the bolts, remove or pop them open. Using a small crescent wrench unscrew the nuts from the bolts. Alternate side to side when unscrewing this will be much more important when reinstalling the water line repair bolts but alternate anyhow.
After you have the stems out you should be able to find the washer on the "inside" end. If it is nicked, torn or brittle it is likely the cause of your drip. Even if it looks brand new, go ahead and replace it. You've already come this far. You can get replacement washers at almost any hardware store. Sometimes you may want to replace the whole stem, especially if the handle end is stripped out. It's best to just take the stem with you to the store and see if you can match it up. Most Do It Yourself stores have replacement stems for many popular brands. If your valve has a center diverter valve to switch the waterfrom the tub spout to the shower head the same process applies. Many times it is easier to replace the diverter stem than to repair it. This really depends on the design of the stem.
The location of a plumbing contractor is a key factor. This is because he or she will not only charge you an hourly rate, but travel costs will also be charged. This can add a significant amount to the final bill if the contractor has to travel from the other side of town.
The water line repair most likely damaged your electrical outlets and lighting fixtures. Have a qualified electrician come in to evaluate and repair the electrical.
I bought a new kitchen sink from a brand name building supply company and hired a plumber to install it. After he had left and I filled up my new sink to wash my first load of dishes in it, I noticed the water level had dropped. You wouldn't want to feel my shock and imagine the angry words that came out of my mouth! I couldn't believe that I had spent $300.00 on a brand new sink that couldn't hold water!
A large plumbing job, such as re-piping or installing additional fixtures, may require a permit. Check with your city's department of building and safety before asking for estimates, and avoid any plumbers who are reluctant to comply with regulations. Report this page